BS - Construction Science and Management (CSM)
Select your correct catalog year's flowchart to use as you schedule your next courses. The flowchart graphically displays all required courses with prerequisites shown.
Pre-Construction Minimum Grade Requirements:
The 30-hour Pre-Construction curriculum requires a grade of a "C" or higher in, along with earning at least a 2.5 overall GPA. If you are in your last Pre-Construction course(s) and you apply to matriculate to the full CSM major, you will be allowed to pre-register for advanced CSM courses for the next semester. However, if you do not meet the individual course grade requirement of a "C" or higher grade or the overall 2.5 GPA for the 30 hours of Pre-Construction courses, you will be dropped from all advanced CSM courses after grades are posted for that semester.
The application to matriculate to the full CSM major is on ePortfolio:
ePortfolio Application Directions:
Timelines for the Matriculation Application:
- February 15th - Matriculation Applications open on ePortfolio with the review beginning March 1st.
- September 15th - Matriculation Applications open on ePortfolio with review beginning October 1st.
Failure to submit the Matriculation Application will result in NOT being able to register for any advanced level CSM courses.
The construction industry is the largest production industry in the United States, with expenditures exceeding $750 billion per year. In fact, 6% of the population is directly employed in construction, with another 6% employed by companies that support construction. The industry is characterized by rapid growth and continuous technological changes as new materials, building techniques and increasingly sophisticated projects are designed and built. The key professional in this industry is the constructor, or construction manager, who is the trained professional who manages a project from start to finish on time and within budget. The Construction Science and Management (CSM) Program is specifically designed to prepare you for this field.
|Mr. John Casstevens email@example.com|
|Mr. Will Holderfirstname.lastname@example.org|
|Dr. Soon-Jae Leeemail@example.com|
|Dr. Selen Karasulu firstname.lastname@example.org|
|Dr. Hyunhwan Kim email@example.com|
|Dr. Krishna Kisi firstname.lastname@example.org|
|Dr. BJ Spencer, CSM Program Coordinatoremail@example.com|
|Dr. Kimberly Talleyfirstname.lastname@example.org|
|Dr. Gary Winekemail@example.com|
CSM advisors are assigned to students based on the last two digits of their student ID number. It is highly recommended that CSM students see their CSM advisors before they register for classes to be sure they are taking their courses in the proper order.
|Advisor||Last 2 Numbers||Room|
|Mr. Will Holder||(00-19)||RFM 2240G|
|Dr. Soon-Jae Lee||(20-39)||RFM 2213|
|Dr. Gary Winek||(40-59)||RFM 2240D|
|Dr. B.J. Spencer||(60-79)||RFM 4245|
|Dr. Kimberly Talley||(80-99)||RFM 4244|
All students declaring the Bachelor of Science with a Major in Construction Science and Management (CSM) first enter the degree through a Pre-Undergraduate Degree Program in CSM, commonly referred to as Pre-Construction. Once the student has successfully completed the required 30 hours of Pre-Construction coursework (per the table below), or is in the semester in which they are completing their remaining Pre-Construction course(s), they can apply to matriculate into the full CSM major. After matriculation, students' degree designations in their degree audits is changed from "Pre-Undergraduate Degree Program" to a "Bachelor of Science".
|CSM 1260||Introduction to the Construction and Concrete Industry|
|CSM 2313||Fundamentals of Architectural Problem-Solving and Design|
|CSM 2342||Construction Materials and Processes|
|TECH 2351||Statics and Strengths of Materials|
|MATH 2328||Elementary Statistics|
|CHEM 1335 & 1141||Engineering Chemistry and Lab|
|PHYS 1315 & 1115||General Physics I and Lab|
|PHYS 1325 & 1125||General Physics II and Lab|
Upper Division Courses in Construction Science and Management
Students must matriculate into the full CSM Major before enrolling in the following Construction Courses:
|CSM 2160||Introduction to Construction Surveying|
|CSM 2360||Residential Construction Systems|
|CSM 3360||Structural Analysis (TECH 2351 prerequisite)|
|CSM 3361||Commercial Building Construction Systems|
|CSM 3363||Heavy, Civil, and Highway Construction Systems|
|CSM 3366||Soils and Foundations (TECH 2351 prerequisite)|
|CSM 3367||Mechanical, Electrical, and Plumbing Systems|
|CSM 4360||Senior Construction Management Capstone|
|CSM 4361||Construction Estimating|
|CSM 4364||Construction Project Management and Scheduling|
|CSM 4368||Environmentally Conscious Design and Construction|
|CSM 4369||Construction Contracts, Liability and Ethics|
NOTE: Students can still take all their General Education courses, Business Minor courses and select CSM courses that do not require the Pre-Construction Curricula such as CSM 4313 Advanced Architectural Design (CSM 2313 prerequisite) and CSM 4380 Construction Safety (Junior status required), and TECH 2190 Internship.